Secure your code as it's written. Use Snyk Code to scan source code in minutes - no build needed - and fix issues immediately.
def test_resets_when_count_is_1(self):
initial_date = datetime.datetime(2013, 4, 30, 1, 1, 1)
changed_date = datetime.datetime(2013, 6, 13, 1, 1, 1)
datetime.datetime.set_now(initial_date)
lim = Limit()
initial = RawLimit(50, 100, 10)
changed = RawLimit(1, 100, 10)
lim.set_raw_limit(initial)
initial_start_time = lim.start_time
datetime.datetime.set_now(changed_date)
lim.set_raw_limit(changed)
assert initial_start_time != lim.start_time
assert 1 == lim.count
def test_setting_lower_count(self):
lim = Limit()
initial = RawLimit(50, 100, 10)
changed = RawLimit(10, 100, 10)
lim.set_raw_limit(initial)
lim.set_raw_limit(changed)
assert 50 == lim.count
def test_wait_time_under_limit(self):
lim = Limit()
lim.set_raw_limit(RawLimit(50, 100, 10))
until = lim.wait_until()
assert datetime.datetime(datetime.MINYEAR, 1, 1) == until
def test_start_time_stays_constant(self):
initial_date = datetime.datetime(2013, 4, 30, 1, 1, 1)
changed_date = datetime.datetime(2013, 6, 13, 1, 1, 1)
datetime.datetime.set_now(initial_date)
lim = Limit()
initial = RawLimit(1, 100, 10)
lim.set_raw_limit(initial)
datetime.datetime.set_now(changed_date)
for count in range(2, 200):
changed = RawLimit(count, 100, 10)
lim.set_raw_limit(changed)
assert initial_date == lim.start_time
assert count == lim.count
assert 100 == lim.limit
assert 10 == lim.duration
def test_wait_time_over_limit(self):
initial_date = datetime.datetime(2013, 4, 30, 1, 1, 1)
limit_duration = 200
datetime.datetime.set_now(initial_date)
lim = Limit()
lim.set_raw_limit(RawLimit(10, 10, limit_duration))
expected_time = initial_date + datetime.timedelta(seconds=limit_duration)
actual_time = lim.wait_until()
assert expected_time == actual_time
def test_limit_duration_changed(self):
initial_date = datetime.datetime(2013, 4, 30, 1, 1, 1)
changed_date = datetime.datetime(2013, 6, 13, 1, 1, 1)
datetime.datetime.set_now(initial_date)
lim = Limit()
initial = RawLimit(50, 100, 10)
changed = RawLimit(50, 100, 20)
lim.set_raw_limit(initial)
initial_start_time = lim.start_time
datetime.datetime.set_now(changed_date)
lim.set_raw_limit(changed)
assert initial_start_time != lim.start_time
assert 20 == lim.duration
def test_set_raw_limit_first_set(self):
initial_date = datetime.datetime(2013, 4, 30, 1, 1, 1)
datetime.datetime.set_now(initial_date)
lim = Limit()
raw = RawLimit(50, 100, 10)
lim.set_raw_limit(raw)
assert initial_date == lim.start_time
assert 50 == lim.count
assert 100 == lim.limit
assert 10 == lim.duration
def test_setting_lower_count(self):
lim = Limit()
initial = RawLimit(50, 100, 10)
changed = RawLimit(10, 100, 10)
lim.set_raw_limit(initial)
lim.set_raw_limit(changed)
assert 50 == lim.count
def test_limit_duration_changed(self):
initial_date = datetime.datetime(2013, 4, 30, 1, 1, 1)
changed_date = datetime.datetime(2013, 6, 13, 1, 1, 1)
datetime.datetime.set_now(initial_date)
lim = Limit()
initial = RawLimit(50, 100, 10)
changed = RawLimit(50, 100, 20)
lim.set_raw_limit(initial)
initial_start_time = lim.start_time
datetime.datetime.set_now(changed_date)
lim.set_raw_limit(changed)
assert initial_start_time != lim.start_time
assert 20 == lim.duration
def test_resets_when_count_is_1(self):
initial_date = datetime.datetime(2013, 4, 30, 1, 1, 1)
changed_date = datetime.datetime(2013, 6, 13, 1, 1, 1)
datetime.datetime.set_now(initial_date)
lim = Limit()
initial = RawLimit(50, 100, 10)
changed = RawLimit(1, 100, 10)
lim.set_raw_limit(initial)
initial_start_time = lim.start_time
datetime.datetime.set_now(changed_date)
lim.set_raw_limit(changed)
assert initial_start_time != lim.start_time
assert 1 == lim.count