micrOS

> "Simple, yet increadbly useful."

Thanks for , follow us on:

micrOS is a micropython based mini application execution platform with ShellCli (socket) and WebCli (http) servers and several other embedded features. > It uses direct wifi connection to access the exposed functionalities.

In case of any technical comments or requests, please use .

Example shortcut (usage of the API): link
Access rest api over browser: http://.local

---

---

📲 💻 ShellCli: Generic session-based communication API
📲 WebCli: Apple shortcuts compatible REST API and http homepage
   ✉️ Expose upython module functions - telnet TCP/IP and REST API
⚙️ 📝 Device initialization from user config
🧩 Codeless end user experience via phone client
⚠️ No external server or service required for client-device communication
   ⚠️ 🛡 Works on Local Network (WiFi-WLAN)
🛠 Easy to create custom application(s) aka create your own Load Modules:
🦾 Built-in scheduling (IRQs):
   - Time stamp based
   - Geolocation based clock setup + time tags: sunset, sunrise
   - Simple periodic
🔄 Async task manager - start (&/&&) / list / kill / show

🚀🎈Lightweight and high performance core system that leaves you space 😎

◉ Shortcuts:

1. micrOS Client Application link
2. micrOS Installer link
3. micrOS Tutorials link
4. micrOS System and features link
5. Pin mapping - GPIO link
6. micrOS Node configuration link
7. micrOS create custom Load Modules: link
8. micrOS Gateway server with Prometheus&Grafana: link
9. Release notes: link

---

---

micrOS Client Application

       

---

---

Installing micrOS with DevToolKit #ESP32 and more

macOS / Windows / Linux to install any esp32 board

End-to-End solution for deployment, update, monitor and develop micrOS boards.

I would suggest to use micrOS GUI as a primary interface for micrOS development kit, but you can use cli as well if you prefer.

> Note: The main purpose of the USB deployment scripts to install micropython on the board and put all micrOS resources from micrOs/toolkit/workspace/precompiled to the connected board.

1. Install python3.9+

Link for python 3.9+ download

> Note: Allow extend system path with that python version (installation parameter)
> On Windows: RUN AS ADMINISTARTOR

---

2. Install micrOS devToolKit GUI

On macOS/Linux

 Open command line on mac, press: commnd+space + type: terminal + press: enter

Download and install micrOS devToolKit python package:

pip3 install --upgrade pip; pip3 install micrOSDevToolKit

> Later on you can update the package with

pip3 install --upgrade micrOSDevToolKit

---

On Windows:

Download and install micrOS devToolKit python package:

Open Windows PowerShell, press windows+R + type: powershell + press enter

Copy the following lines to the PowerShell and press enter.

python -m pip install --upgrade pip
python -m pip install micrOSDevToolKit

Later on you can update the package with

python -m pip install --upgrade micrOSDevToolKit

---

3. Start micrOS devToolKit GUI

Copy the following command to the command line and press enter to start.

devToolKit.py

It will open a graphical user interface for micrOS device management, like usb deploy, update, OTA operations, test executions, etc...

---

• Example

1. Select BOARD TYPE
2. Click on [Deploy (USB)] button -> presss YES

It will install your board via USB with default settings. Continue with micrOS Client app...

> Note: At the first USB deployment, devToolKit will ask to install SerialUSB driver and it will open the driver installer as well, please follow the steps and install the necessary driver.

╔╗ ╔╗                  ╔═══╗╔╗ ╔╗╔═╗ ╔╗       ╔═══╗
║║ ║║                  ║╔══╝║║ ║║║║╚╗║║       ╚╗╔╗║
║╚═╝║╔══╗ ╔╗╔╗╔══╗     ║╚══╗║║ ║║║╔╗╚╝║    ╔═╗ ║║║║
║╔═╗║╚ ╗║ ║╚╝║║╔╗║     ║╔══╝║║ ║║║║╚╗║║    ╚═╝ ║║║║
║║ ║║║╚╝╚╗╚╗╔╝║║═╣    ╔╝╚╗  ║╚═╝║║║ ║║║    ╔═╗╔╝╚╝║
╚╝ ╚╝╚═══╝ ╚╝ ╚══╝    ╚══╝  ╚═══╝╚╝ ╚═╝    ╚═╝╚═══╝

---

micrOS Projects

---

---

micrOS Video Tutorials

---

micrOS System, message-function visualization

>Note: micrOS development kit contains command line interface for socket communication. Example: devToolKit.py --connect

---

micrOS Framework Features💡

• 🕯micrOS loader - starts micrOS or WEBREPL(update / recovery modes)

  • OTA update - push update over wifi (webrepl automation) / monitor update and auto restart node

• 📄Config handling - user config - node_config.json

  • ⏳Boot phase - preload Load Module(s)
    • For pinout and last state initialization - based on node_config boothook
    • Example values: rgb load; neopixel load
    • Comments # can be used: #rgb load; neopixel load, excellect for experimentation.
  • 📡Network handling - based on node_config
    • STA / AP network modes, nwmd
    • NTP + UTC aka clock setup
      • API: ip-api.com
    • Static IP configuration, devip
    • dhcp hostname setup, devfid.local
    • system uptime measurement
  • ⚙️Scheduling / External events - Interrupt callback - based on node_config
    • Time based
      • ⌛️simple LM task pool execution timirq & timirqcbf
        • Timer(0)
        • Comments # can be used in timirqcbf
      • 🗓cron [time stump!LM task] pool execution cron & crontasks

        • Timer(1)

        • timestamp: WD:H:M:S!LM FUNC, ranges: 0-6:0-23:0-59:0-59!LM FUNC

          • example: *:8:0:0!rgb rgb r=10 g=60 b=100; etc., it will set rgb color on analog rgb periphery at 8am every day.
          • WD: 0...6 0=Monday, 6=Sunday
            • optional range handling: 0-2 means Monday to Wednesday

        • tag: sunset / sunrise

          • example: sunset!rgb rgb r=10 g=60 b=100; etc., it will set rgb color on analog rgb periphery at every sunset, every day.
          • optional minute offset (+/-): sunrise+30

        • Comments cannot be used in crontasks! No multiple commands in this mode!

        • API: api.sunrise-sunset.org

    • 💣Event based
      • Set trigger event irqX
        • Trigger up/down/both irqX_trig
        • With LM callback function irqX_cbf
        • Comments # can be used in irqX_cbf
      • X can be = 1, 2, 3 or 4

• ⚙️**[L]oad [M]odule** aka application execution

  • Lot of built-in functions (table below)
  • Create your own module with 3 easy steps
    • Create a python file, naming convention: LM_.py
      • Replace `` for anything you prefer!
    • Write python functions, you can call any function from that module...
    • Upload modul with "drag&Drop" devToolKit GUI devToolKit.py

• 📨ShellCli - wireless communication interface with the nodes

  • System commands: help, version, reboot, modules, webrepl, webrepl --update, etc.
    • After webrepl --update command the micrOS system reboots and waits for ota update in webrepl mode about 20 seconds.
  • Config handling SET/GET/DUMP - node_config.json
    • enter configuration mode: conf
    • Print out all parameters and values: dump
    • exit configuration mode:noconf
  • LM - Load Module function execution (application modules)
    • Example: system info

• 🖇microIO pinout handling - lookuptables for each board

  • Predefined pinout modules for esp32, tinyPico
  • Create your pinout based on IO_esp32.py, naming convencion: IO_.py
  • To activate your custom pinout set cstmpmap config parameter to ``
  • HINT: to get pin number you can get it by pin label, like: system pinamp

• 🔄 Task manager aka Async LM jobs

  • Capable of execute [L]oad [M]odules in the background
  • Invoke with single execution & or for loop execution &&
  • Example:
    • In loop: system heartbeat &&
      • Loop frequency conrol: system heartbeat &&1000, it will execute every sec
    • Single call: system heartbeat &
      • Delayed execution (ms): system heartbeat &1000, waits 1 sec before execution.
  • Stop task: task kill system.heartbeat
  • Show task live ouput: task show system.heartbeat

⌘ DevToolKit CLI feature:

• Socket client python plugin - interactive - non interactive mode

---

Boards and suggestions

There are multiple types of MCU-s (esp32, esp32s3, etc.) available to order, BUT to be able to enable more features (~2 Load Modules) and full capable WebUI interface you need to have more then 190-210kb of ram (basic boards)(ℹ️).

There is a solution ✅, additinal psram: ~2-4-8Mb boards are available. It used to name as psram or spiram, even there is a type octo-psram, so check it before buy!!! Psram needs to be supported on micropython side as well !!!

Suggestions - 🔮futureproof hardware:

esp32s3: Very fast new espressif module that supports psram detection, so you can freely select any module with this MCU with additinal ram, and micros will work with the best performance, typical ram sizes: 2Mb (more then enough for everage usage), 4-8Mb (capacble of image and sound processing tasks and load all GPIO-s 🚀)

esp32s3-octo Same sa normal psram, just uses 8 pins to connect to the MCU, basically faster...

tinypico excellet hardware, bit pricy, with 4Mb of ram.

esp32cam it has a custom image and attached 8Mb of ram.

So prefer boards with more psram 2Mb-8Mb, minumum requirement for the full flatched setup ~400kb but smallest psram is 2Mb, in practive:

• max measured 4Mb is 3.2% 128kb - oled_ui and lot of things loaded...
• camera stream can use about 50% of ram, that means about 2Mb of ram usage.

ℹ️ With basic 190-210kb of ram you can use the system with ShellCli with no issue, just webUI dashboard cannot be load due to memory limitations..., under 140kb of system ram the system not reliable, so these boards are not supported.

> Note:

esp32 also can be totally fine with ShellCli, WebCli and 1 load module or multiple modules based on module size... just can be limited by the available memory soonor the later ... (WebCli javascript, htmls are quite small but can be few tens of kilobytes, also multiple async tasks in the background can take same, and roughly around 80% of memory usage system can be instable and restarts.) So if you have a spare one try out micrOS with a range of features 😃

---

Built in periphery support

#Sensors / inputes #Actuators / outputs

[CLICK] Show micrOS Load Module functions

---

Device Pinouts for wiring

Logical pin association handling

micrOS/source/microIO.py

LogicalPin lookup tables:

• tinypico
• esp32
• esp32s2
• esp32s3
• raspberryPicoW - reset needed after ota update (webrepl limitation)
• IO_*.py etc.

> Note: Good idea to use costant variable for pin map declaration, check the files for more info, These files are also precompiled automatically into byte steams -> .mpy

GENERAL CONTROLLER CONCEPT: microPLC

---

micrOS node configuration, parameters with description

These parameters controlls micrOS core functionalities, so you can define an entire system by setting your custom configurations via these values.

Basic parameters:

Config keys	Default value and type	Reboot required	Description
devfid	node01 ``	Yes	Device friendly "unique" ID - (1) defines AccessPoint (AP) network name and (2) in Station (STA) network mode the DHCP device name for IP address resolve also (3) this is the ShellCli prompt.
staessid	your_wifi_name ``	Yes	Wifi router name to connect (for STA default connection mode). You can list multiple wifi names separated with ;
stapwd	your_wifi_passwd ``	Yes	Wifi router password (for STA default connection mode). You can list multiple wifi passwords separated with ; connected in order to staessid wifi names.
appwd	ADmin123 ``	Yes	Device system password.: Used in AP password (access point mode) + webrepl password + micrOS auth
boothook	n/a ``	Yes	Add Load Module execution(s) to the boot sequence. Separator ;. Examples: rgb load; cct load but you can call any load module function here if you want to run it at boot time.
webui	False bool	Yes	Launch http rest server on port 80 (in parallel with micrOS shell on port 9008 aka socport). It has 2 endpoints: / aka main page (index.html) and /rest aka rest (json) interface for load module execution. Example: .local or .local/rest + optional parameters: /rgb/toggle. Apple shortcuts compatible
cron	False ``	Yes	Enable timestamp based Load Module execution aka Cron scheduler (linux terminology), Timer(1) hardware interrupt enabler.
crontasks	n/a ``	Yes	Cron scheduler input, task format: WD:H:M:S!module function e.g.: 1:8:0:0!system heartbeat, task separator in case of multiple tasks: ;. [WD:0-6, H:0-23, M:0-59, S:0-59] in case of each use: *. Instead WD:H:M:S you can use suntime tags: sunset, sunrise, optional offset: sunset+-, sunrise+-, example: sunset-30!system heartbeat. Range of days: WD can be conrete day number or range like: 0-2 means Monday to Wednesday.
irq1	False ``	Yes	External event interrupt enabler - Triggers when desired signal state detected - button press happens / motion detection / etc.
irq1_cbf	n/a ``	Yes	irq1 enabled, calls the given Load Modules, e.x.: module function optional_parameter(s) when external trigger happens.
irq1_trig	n/a ``	Yes	Sets trigger mode for external irq, signal phase detection, values up (default: n/a) or down or both.
irq2	False ``	Yes	External event interrupt enabler - Triggers when desired signal state detected - button press happens / motion detection / etc.
irq2_cbf	n/a ``	Yes	irq2 enabled, calls the given Load Modules, e.x.: module function optional_parameter(s) when external trigger happens.
irq2_trig	n/a ``	Yes	Sets trigger mode for external irq, signal phase detection, values up (default: n/a) or down or both.
irq3	False ``	Yes	External event interrupt enabler - Triggers when desired signal state detected - button press happens / motion detection / etc.
irq3_cbf	n/a ``	Yes	irq3 enabled, calls the given Load Modules, e.x.: module function optional_parameter(s) when external trigger happens.
irq3_trig	n/a ``	Yes	Sets trigger mode for external irq, signal phase detection, values up (default: n/a) or down or both.
irq4	False ``	Yes	External event interrupt enabler - Triggers when desired signal state detected - button press happens / motion detection / etc.
irq4_cbf	n/a ``	Yes	irq4 enabled, calls the given Load Modules, e.x.: module function optional_parameter(s) when external trigger happens.
irq4_trig	n/a ``	Yes	Sets trigger mode for external irq, signal phase detection, values up (default: n/a) or down or both.
irq_prell_ms	300 ``	Yes	"Prell": contact recurrence (hw property), for fake event filtering... 😄 Time window to ignore external IRQ events in ms.
timirq	False ``	Yes	Timer(0) interrupt enabler - background "subprocess" like execution, timer based infinite loop for the LoadModule execution.
timirqcbf	n/a ``	Yes	if timirq enabled, calls the given Load Module(s), e.x.: module function optional_parameter(s), task separator: ;
timirqseq	1000 ``	Yes	Timer interrupt period in ms, default: 3000 ms (for timirq infinite loop timer value)
telegram	n/a str	No	TELEGRAM_BOT_TOKEN to enable micrOS Notifications. Hint, to create bot with botfather: click. After enabling this, send /ping to telegram chat for chat ID sync.

Advanced parameter options:

Config keys	Default value and type	Reboot required	Description
utc	60 ``	Yes	NTP-RTC - timezone setup (UTC in minute) - it is automatically calibrated in STA mode based on geolocation.
cstmpmap	n/a ``	Yes	Default (n/a), select pinmap automatically based on platform (IO_). Manual control / customization of application pins, syntax: pin_map_name; pin_name:pin_number; etc. [1][optional] pin_map_name represented as IO_.py/.mpy file on device. [2+][optinal] dht:22 overwrite individual existing load module pin(s). Hint: pinmap() to get app pins, example: neopixel pinmap()
boostmd	True ``	Yes	boost mode - set up cpu frequency low or high 16Mhz-24MHz (depends on the board).
aioqueue	3 ``	Yes	System async queue controller (resource limiter).: #1 Set asyc task queue limit (for soft tasks: &). Furthermore #2 Socker server-s (webCli, ShellCli) client number limiter. 3 means: 3 cooperative connection (queue) shared by webCli and shellCli. It can be increased based on available resources.
devip	n/a ``	Yes(N/A)	Device IP address, (first stored IP in STA mode will be the device static IP on the network), you can set specific static IP address here.
nwmd	n/a ``	Yes	Prefered network mode - AP or STA, default is STA.
soctout	30 ``	Yes	Socket server connection timeout. If user is passive for soctout sec, and new connection incoming, then close passive connection. So it is time limit per connection in the aioqueue.
socport	9008 ``	Yes	Socket server service port (should not be changed due to client and API inconpatibility).
auth	False ``	Yes	Enables socket password authentication, password: appwd. Passwordless functions: hello, version, exit. WARNING OTA upade not supported in this mode (yet).
dbg	True ``	Yes	Debug mode - enable micrOS system printout, server info, etc. + progress LED.
hwuid	n/a ``	N/A	USED BY SYSTEM (state storage) - hardware address - dev uid
guimeta	n/a str	No	USED BY micrOS Client (state storage) - stores - offloaded parameter type in config. Clinet widget meta data storage.

> Note: Default empty value: n/a in case of string parameter. > Note: Cron is only available on devices with Timer(1): esp32

---

---

Networking - automatic network modes

micrOS Gateway in docker

With prometheus database. Check the micrOS Gateway docker README for details.

Resources:

> modify prometheus.yml regarding what sensors on which endpoint do you want to scrapre data from.

• docker-compose
• prometheus config

cd ./env/docker
docker-compose -p gateway up -d

Official DockerHub

micrOS Customization

---

---

FUTURE RELEASE PLANS

Version 3.0.0-0

    Core:
    - Async SSL/TLS integration (micropython 1.22+ required)
        - urequest module async redesign for rest clients
            - Notify (telegram) + server (listener - chatbot)
            - Time (ntp location + sunset/sunrise api)

Version 3.1.0-0

    Core:
    - Async socket SSL/TLS integration (with auth.)
        - WebCli (http), ShellCli (terminal) and InterCon
        - Study of ESP-NOW (peer-to-peer communication) integration into InterCon (micropython requirements?)

Version 4.0.0-0

    Core:
    - Network stack redesign
        - Network
            - wifi (defualt, current interfaces)
            - Study of BLE (Shell)
    - Low power mode (with BLE) and soft-sleep / deep-sleep

VERSION (TAG)	RELEASE INFO	MICROS CORE MEMORY USAGE	SUPPORTED DEVICE(S)	APP PROFILES	Load Modules	NOTE
v0.1.0-0	release_Info-0.1.0-0	78,4% 29 776 byte	esp8266	App Profiles	LM manual	Stable Core with applications - first release
v0.4.0-0	release_Info-0.4.0-0	81,0% 30768 byte	esp8266	App Profiles	LM manual	micrOS multi device support with finalized core and so more. OTA update feature.
v0.4.0-0	release_Info-0.4.0-0	47,1% 52 416 byte	esp32	App Profiles	LM manual	micrOS multi device support with finalized core and advanced task scheduler based on time, and and so more. OTA update feature.
v1.0.0-0	release_Info-1.0.0-0	47,9% 53 280 byte	esp32	App Profiles	LM manual	Release of v1 micrOS, timer and event based irqs, cron task scheduling, realtime communication, multiple device support. OTA, etc.
v1.2.2-0	release_Info-1.2.2-0	48,6% 54 032 byte	esp32	App Profiles	LM manual	Public Release of v1 micrOS, timer and event based irqs, cron task scheduling, realtime communication, multiple device support. OTA update, thread from socket shell (beta) etc.
v light-1.3.0-0	-	-	esp8266	lightweight branch	-	remove esp8266 due to memory limitation - BUT still supported with limited functionalities on lightweight branch. Hint: Change branch on github and download zip file, then start micrOSDevToolKit dashboard GUI
v 1.5.0-1	release_Info-1.5.0-1	58,2% 64 704 byte	esp32 (tinyPico)	App Profiles	LM manual	Advanced Timer IRQ based scheduling (cron & timirq), Geolocation based timing features, External IRQs with 4 channel (event filtering), finalized light controls, Device-Device comminucation support, etc.
v 1.21.0-4	release_Info-1.21.0-4	57.3% 63 728 byte	esp32 (tinyPico, esp32s2, esp32s3)	App Profiles	LM manual	Full async core system with advanced task management and device to device communication, task scheduling and much more ... with more then 30 application/pheriphery support.
v 2.0.0-0	release_Info-2.0.0-0	45.4% 68.7 kb	esp32 (tinyPico, esp32s2, esp32s3)	App Profiles	LM manual	Optimizations, WebCli with web frontends, Camera support. Micropython 1.21 async maxed out 😄
v 2.6.0-0	release_Info-2.6.0-0	48.3% 72.6 kb	esp32 (tinyPico, esp32s2, esp32s3)	App Profiles	LM manual	WebCli http server enhancements. New webapps: dashboard. Core system official interface finalization towards Load Modules: Common.py, Types.py (frontend generation), microIO.py (pinout handling).

---

---

Developer Quick guide

Note:

> Secure Core (OTA static modules) (GUI): boot.py, micrOSloader.mpy, Network.mpy, ConfigHandler.mpy, Debug.mpy

Erase device & Deploy micropython & Install micrOS

Go to micrOS repo, where the devToolKit.py located.

devToolKit.py --make

> Note: Follow the steps 😃

Search and Connect to the device

devToolKit.py -s -c

---

User commands

devToolKit.py -h

optional arguments:
  -h, --help            show this help message and exit

Base commands:
  -m, --make            Erase & Deploy & Precompile (micrOS) & Install (micrOS)
  -r, --update          Update/redeploy connected (usb) micrOS. - node config will be restored
  -s, --search_devices  Search devices on connected wifi network.
  -o, --OTA             OTA (OverTheArir update with webrepl)
  -c, --connect         Connect via socketclinet
  -p CONNECT_PARAMETERS, --connect_parameters CONNECT_PARAMETERS
                        Parameters for connection in non-interactivve mode.
  -a APPLICATIONS, --applications APPLICATIONS
                        List/Execute frontend applications. [list]
  -stat, --node_status  Show all available micrOS devices status data.
  -cl, --clean          Clean user connection data: device_conn_cache.json

Search devices

devToolKit.py --search_devices

or

devToolKit.py -s

List discovered devices with status updates

devToolKit.py -stat

or

devToolKit.py --node_status

Output:

       [ UID ]                [ FUID ]		[ IP ]		[ STATUS ]	[ VERSION ]	[COMM SEC]
__localhost__                 __simulator__     127.0.0.1	OFFLINE				n/a
micrOS            TinyDevBoard      10.0.1.72	ONLINE		1.16.2-2		0.072
micrOS            LivingKitchen     10.0.1.200	ONLINE		1.16.2-2		0.076
micrOS            RoboArm           10.0.1.232	ONLINE		1.15.4-0		0.072
micrS            Cabinet           10.0.1.204	ONLINE		1.16.2-2		0.074
micr4OS            TestBird          10.0.1.179	ONLINE		1.16.2-1		0.083
micrOS            RingLamp          10.0.1.75	ONLINE		1.16.2-2		0.099
micrOS            CatFeeder         10.0.1.111	OFFLINE				n/a
micrOS            ImpiGamePro       10.0.1.23	OFFLINE				n/a
micrS            micrOSPublic02    10.0.1.47	ONLINE		1.16.2-2		0.101
micrcOS            micrOSPublic01    10.0.1.197	ONLINE		1.16.2-2		0.099
micrcOS            experipurple      10.0.1.94	OFFLINE				n/a

Other Developer commands

Development & Deployment & Connection:
  -f, --force_update    Force mode for -r/--update and -o/--OTA
  -e, --erase           Erase device
  -d, --deploy          Deploy micropython
  -i, --install         Install micrOS on micropython
  -l, --list_devs_n_bins
                        List connected devices & micropython binaries.
  -ls, --node_ls        List micrOS node filesystem content.
  -u, --connect_via_usb
                        Connect via serial port - usb
  -b, --backup_node_config
                        Backup usb connected node config.
  -sim, --simulate      start micrOS on your computer in simulated mode
  -cc, --cross_compile_micros
                        Cross Compile micrOS system [py -> mpy]
  -gw, --gateway        Start micrOS Gateway rest-api server
  -v, --version         Get micrOS version - repo + connected device.

Socket terminal example - non interactive

Identify device

devToolKit.py -c -p '--dev slim01 hello'
Load MicrOS device cache: /Users/bnm/Documents/NodeMcu/MicrOs/tools/device_conn_cache.json
Activate MicrOS device connection address
[i]         FUID        IP               UID
[0] Device: slim01 - 10.0.1.73 - 0x500x20x910x680xc0xf7
Device was found: slim01
hello:slim01:0x500x20x910x680xc0xf7

Get help

devToolKit.py -c -p '--dev BedLamp help'

[MICROS]   - built-in shell commands
   hello   - hello msg - for device identification
   version - returns micrOS version
   exit    - exit from shell socket prompt
   reboot  - system soft reboot (vm), hard reboot (hw): reboot -h
   webrepl - start webrepl, for file transfers use with --update
[CONF] Configure mode - built-in shell commands
  conf       - Enter conf mode
    dump       - Dump all data
    key        - Get value
    key value  - Set value
  noconf     - Exit conf mode
[TASK] postfix: &x - one-time,  &&x - periodic, x: wait ms [x min: 20ms]
  task list         - list tasks with s
  task kill    - stop task
  task show    - show task output
[EXEC] Command mode (LMs):
   help lm  - list ALL LoadModules
   cct
      help
   co2
      help
   dht22
        help
   intercon
           help
   robustness
             help
   system
         help

Embedded config handler

devToolKit.py -c -p '--dev BedLamp conf <a> dump'
  
  staessid  :        
  devip     :        10.0.1.204
  version   :        1.11.0-1
  devfid    :        BedLamp
  cron      :        True
  cronseq   :        3000
  soctout   :        10
  irq2_cbf  :        n/a
  stapwd    :        
  dbg       :        False
  irq2      :        False
  irq1      :        False
  irq1_cbf  :        n/a
  appwd     :        ADmin123
  irq2_trig :        n/a
  hwuid     :        micr7c9ebd623ff8OS
  crontasks :        sunset!cct toggle True;*:0:30:0!cct toggle False;*:5:0:0!cct toggle False
  timirq    :        True
  irq3      :        False
  irq3_cbf  :        n/a
  irq4      :        False
  irq4_cbf  :        n/a
  irq4_trig :        n/a
  nwmd      :        STA
  timirqcbf :        system ha_sta
  irq_prell_ms:      300
  boothook  :        cct load
  aioqueue  :        3
  auth      :        False
  timirqseq :        60000
  utc       :        60
  boostmd   :        True
  socport   :        9008
  irq3_trig :        n/a
  irq1_trig :        n/a
  guimeta   :        ...
  cstmpmap  :        n/a

Load Modules - User defined functions

devToolKit.py -c -p '--dev BedLamp system info'

CPU clock: 24 [MHz]
Mem usage: 71.0 %
FS usage: 14.6 %
upython: v1.19.1 on 2022-06-18
board: ESP32 module with ESP32
mac: 7c:9e:bd:62:3f:f8
uptime: 0 1:29:19

SocketClient

Config:

micrOS/toolkit/user_data/device_conn_cache.json

{
    "__devuid__": [
        "192.168.4.1",
        9008,
        "__device_on_AP__"
    ],
    "__localhost__": [
        "127.0.0.1",
        9008,
        "__simulator__"
    ],
    "micr500291863428OS": [
        "10.0.1.72",
        9008,
        "BedLamp"
    ]
}

Interactive mode

devToolKit.py -c 
or
devToolKit.py -connect

[i]         FUID        IP               UID
[0] Device: __device_on_AP__ - 192.168.4.1 - __devuid__
[1] Device: __simulator__ - 127.0.0.1 - __localhost__
[2] Device: BedLamp - 10.0.1.72 - micr500291863428OS

Choose a device index: 5
Device was selected: ['10.0.1.204', 9008, 'Cabinet']
BedLamp $ help
[MICROS]   - built-in shell commands
   hello   - hello msg - for device identification
   version - returns micrOS version
   exit    - exit from shell socket prompt
   reboot  - system soft reboot (vm), hard reboot (hw): reboot -h
   webrepl - start webrepl, for file transfers use with --update
[CONF] Configure mode - built-in shell commands
  conf       - Enter conf mode
    dump       - Dump all data
    key        - Get value
    key value  - Set value
  noconf     - Exit conf mode
[TASK] postfix: &x - one-time,  &&x - periodic, x: wait ms [x min: 20ms]
  task list         - list tasks with s
  task kill    - stop task
  task show    - show task output
[EXEC] Command mode (LMs):
   help lm  - list ALL LoadModules
   cct
      help
   co2
      help
   dht22
        help
   intercon
           help
   robustness
             help
   system
         help
BedLamp $  exit
Bye!

Project structure

micrOS resources library

micrOS Core

Core micrOS resources
1	154	Time.py                  (mlint: True)	(pylint: 9.17)	(ref.: 6)
2	104	micrOSloader.py          (mlint: True)	(pylint: 7.59)	(ref.: 1)
3	50	Hooks.py                 (mlint: True)	(pylint: 9.68)	(ref.: 1)
4	418	Server.py                (mlint: True)	(pylint: 9.29)	(ref.: 4)
5	454	Tasks.py                 (mlint: True)	(pylint: 9.71)	(ref.: 13)
6	185	Config.py                (mlint: True)	(pylint: 9.44)	(ref.: 13)
7	9	reset.py                 (mlint: True)	(pylint: 8.75)	(ref.: 0)
8	225	Shell.py                 (mlint: True)	(pylint: 9.61)	(ref.: 1)
9	179	Notify.py                (mlint: True)	(pylint: 9.55)	(ref.: 2)
10	77	Types.py                 (mlint: True)	(pylint: 9.69)	(ref.: 11)
11	157	Common.py                (mlint: True)	(pylint: 9.1)	(ref.: 24)
12	153	InterConnect.py          (mlint: True)	(pylint: 9.4)	(ref.: 1)
13	177	Debug.py                 (mlint: True)	(pylint: 8.72)	(ref.: 22)
14	164	Network.py               (mlint: True)	(pylint: 9.71)	(ref.: 10)
15	183	Scheduler.py             (mlint: True)	(pylint: 9.61)	(ref.: 1)
16	113	microIO.py               (mlint: True)	(pylint: 9.08)	(ref.: 38)
17	49	micrOS.py                (mlint: True)	(pylint: 9.3)	(ref.: 1)
18	113	Interrupts.py            (mlint: True)	(pylint: 9.05)	(ref.: 2)
19	15	main.py                  (mlint: True)	(pylint: 8.89)	(ref.: 0)
20	117	urequests.py             (mlint: True)	(pylint: 8.9)	(ref.: 4)

SUM CODE LINES (WITH COMMENTS, WITHOUT EMPTY LINES): 3096

micrOS Load Modules

micrOS Load Module resources
1	231	LM_roboarm.py            (mlint: True)	(pylint: 9.11)	(ref.: 0)
2	122	LM_stepper.py            (mlint: True)	(pylint: 8.9)	(ref.: 1)
3	118	LM_genIO.py              (mlint: True)	(pylint: 7.26)	(ref.: 1)
4	498	LM_oled_ui.py            (mlint: False)	(pylint: 8.83)	(ref.: 0)
5	190	LM_system.py             (mlint: True)	(pylint: 7.57)	(ref.: 3)
6	63	LM_robustness.py         (mlint: True)	(pylint: 7.5)	(ref.: 0)
7	115	LM_co2.py                (mlint: True)	(pylint: 8.42)	(ref.: 3)
8	34	LM_rest.py               (mlint: False)	(pylint: 7.0)	(ref.: 0)
9	266	LM_oled.py               (mlint: True)	(pylint: 9.23)	(ref.: 3)
10	72	LM_tinyrgb.py            (mlint: True)	(pylint: 7.95)	(ref.: 0)
11	96	LM_aht10.py              (mlint: True)	(pylint: 8.73)	(ref.: 0)
12	293	LM_bme280.py             (mlint: True)	(pylint: 8.03)	(ref.: 0)
13	37	LM_ph_sensor.py          (mlint: True)	(pylint: 5.79)	(ref.: 0)
14	241	LM_buzzer.py             (mlint: True)	(pylint: 8.83)	(ref.: 0)
15	199	LM_switch.py             (mlint: True)	(pylint: 8.56)	(ref.: 2)
16	113	LM_servo.py              (mlint: True)	(pylint: 7.73)	(ref.: 4)
17	53	LM_rgbcct.py             (mlint: True)	(pylint: 8.62)	(ref.: 0)
18	284	LM_oled_sh1106.py        (mlint: True)	(pylint: 8.79)	(ref.: 1)
19	150	LM_ld2410.py             (mlint: True)	(pylint: 9.07)	(ref.: 0)
20	273	LM_neopixel.py           (mlint: True)	(pylint: 7.59)	(ref.: 2)
21	274	LM_cct.py                (mlint: True)	(pylint: 8.83)	(ref.: 1)
22	38	LM_L9110_DCmotor.py      (mlint: True)	(pylint: 7.69)	(ref.: 0)
23	256	LM_neoeffects.py         (mlint: True)	(pylint: 6.91)	(ref.: 0)
24	30	LM_i2c.py                (mlint: True)	(pylint: 5.71)	(ref.: 0)
25	69	LM_dht22.py              (mlint: True)	(pylint: 8.0)	(ref.: 0)
26	59	LM_L298N_DCmotor.py      (mlint: True)	(pylint: 8.78)	(ref.: 0)
27	37	LM_esp32.py              (mlint: True)	(pylint: 4.38)	(ref.: 0)
28	56	LM_pet_feeder.py         (mlint: True)	(pylint: 7.88)	(ref.: 0)
29	82	LM_rencoder.py           (mlint: True)	(pylint: 8.92)	(ref.: 0)
30	247	LM_keychain.py           (mlint: False)	(pylint: 9.14)	(ref.: 0)
31	69	LM_dht11.py              (mlint: True)	(pylint: 8.0)	(ref.: 0)
32	74	LM_telegram.py           (mlint: False)	(pylint: 8.94)	(ref.: 0)
33	177	LM_OV2640.py             (mlint: False)	(pylint: 9.06)	(ref.: 0)
34	249	LM_rgb.py                (mlint: True)	(pylint: 8.66)	(ref.: 1)
35	62	LM_distance.py           (mlint: True)	(pylint: 8.14)	(ref.: 0)
36	313	LM_VL53L0X.py            (mlint: True)	(pylint: 9.07)	(ref.: 0)
37	107	LM_light_sensor.py       (mlint: True)	(pylint: 8.94)	(ref.: 0)
38	12	LM_rp2w.py               (mlint: True)	(pylint: 4.44)	(ref.: 0)
39	190	LM_presence.py           (mlint: True)	(pylint: 8.75)	(ref.: 4)
40	29	LM_dashboard_be.py       (mlint: True)	(pylint: 6.5)	(ref.: 0)
41	170	LM_dimmer.py             (mlint: True)	(pylint: 8.22)	(ref.: 0)
42	66	LM_demo.py               (mlint: False)	(pylint: 8.21)	(ref.: 0)
43	105	LM_lmpacman.py           (mlint: True)	(pylint: 8.38)	(ref.: 0)
44	176	LM_gameOfLife.py         (mlint: True)	(pylint: 9.29)	(ref.: 2)
45	58	LM_catgame.py            (mlint: True)	(pylint: 8.46)	(ref.: 0)
46	42	LM_intercon.py           (mlint: True)	(pylint: 8.18)	(ref.: 3)
47	43	LM_ds18.py               (mlint: True)	(pylint: 5.0)	(ref.: 2)
48	250	LM_i2s_mic.py            (mlint: False)	(pylint: 8.71)	(ref.: 1)
49	34	LM_sdcard.py             (mlint: True)	(pylint: 7.88)	(ref.: 0)

SUM CODE LINES (WITH COMMENTS, WITHOUT EMPTY LINES): 6822

> LM (Load Modules) - Application logic - accessable over socket server as a command

micrOS devToolkit resources

DevToolKit Dashboard apps

> You can easly copy the Template_app.py, and create a new socket based app. Template_app.py

micrOS/toolkit/dashboard_apps
│   ├── AirQualityBME280_app.py
│   ├── AirQualityDHT22_CO2_app.py
│   ├── AnalogCCT_app.py
│   ├── AnalogRGB_app.py
│   ├── CatGame_app.py
│   ├── Dimmer_app.py
│   ├── GetVersion_app.py
│   ├── GetVersion_app.pyc
│   ├── NeopixelTest_app.py
│   ├── RoboArm_app.py
│   ├── SysCheck_app.py
│   ├── Template_app.py

Stored connection data and default node configs

micrOS/toolkit/user_data
│   ├── device_conn_cache.json        <- connection cache
│   └── node_config_archive
│       ├── BigRGB-node_config.json
│       ├── Chillight-node_config.json
│       ├── Kapcsolo230-node_config.json
│       ├── LampController-node_config.json
│       ├── MeasureNode-node_config.json
│       ├── MrGreen-node_config.json
│       ├── RingLamp-node_config.json
│       └── test-node_config.json

Virtaulenv for development and stored USB-Serial drivers

micrOS/env/
├── __init__.py
├── driver_cp210x
│   ├── CP210x_Universal_Windows_Driver
│   └── macOS_VCP_Driver
├── requirements.txt
└── venv
    ├── bin
    ├── include
    ├── lib
    └── pyvenv.cfg

Precompiled resources for easy install

micrOS/toolkit/workspace/precompiled
    │   ├── BgJob.mpy
    │   ├── Common.mpy
    │   ├── ConfigHandler.mpy
    │   ├── Debug.mpy
    │   ├── Hooks.mpy
    │   ├── InterConnect.mpy
    │   ├── InterpreterCore.mpy
    │   ├── InterpreterShell.mpy
    │   ├── InterruptHandler.mpy
    │   ├── LM_L298N_DCmotor.mpy
    │   ├── LM_L9110_DCmotor.py
    │   ├── LM_VL53L0X.py
    │   ├── LM_bme280.mpy
    │   ├── LM_buzzer.mpy
    │   ├── LM_catgame.py
    │   ├── LM_cct.mpy
    │   ├── LM_co2.mpy
    │   ├── LM_dht11.mpy
    │   ├── LM_dht22.mpy
    │   ├── LM_dimmer.mpy
    │   ├── LM_distance_HCSR04.py
    │   ├── LM_ds18.mpy
    │   ├── LM_esp32.py
    │   ├── LM_genIO.mpy
    │   ├── LM_i2c.py
    │   ├── LM_intercon.mpy
    │   ├── LM_light_sensor.mpy
    │   ├── LM_neoeffects.mpy
    │   ├── LM_neopixel.mpy
    │   ├── LM_oled.mpy
    │   ├── LM_oled_ui.mpy
    │   ├── LM_pet_feeder.py
    │   ├── LM_ph_sensor.py
    │   ├── LM_rgb.mpy
    │   ├── LM_roboarm.mpy
    │   ├── LM_robustness.py
    │   ├── LM_servo.mpy
    │   ├── LM_stepper.mpy
    │   ├── LM_switch.mpy
    │   ├── LM_system.mpy
    │   ├── LM_tinyrgb.mpy
    │   ├── IO_esp32.mpy
    │   ├── IO_tinypico.mpy
    │   ├── LogicalPins.mpy
    │   ├── Network.mpy
    │   ├── Scheduler.mpy
    │   ├── SocketServer.mpy
    │   ├── Time.mpy
    │   ├── TinyPLed.mpy
    │   ├── boot.py
    │   ├── micrOS.mpy
    │   ├── micrOSloader.mpy
    │   └── reset.mpy

> Note: From the micrOS/source/ by default the LMs are not compiling, to extend complied LM list add LM explicitly to the following file:

micrOs/toolkit/LM_to_compile.dat

---

HINTS

• Save screen console buffer (output) Press ctrl + A : and type hardcopy -h

• Create callgraph: pycallgraph

• Convert PNG/JPG-s to GIF: convert -delay 60 ./*.png mygif.gif

• micrOS core and Load Module source code info:

devToolKit.py -lint
OR
devToolKit.py --linter

micrOS gateway - Linux service template

> [BETA] service setup tool: toolkit/helper_scripts/linux_service/make.bash

• Prerequisite: install micrOS devtoolkit PiP package

• Create service: micrOS gateway service

• [1] create micros-gw.service file:

[Unit]
Description=micrOS gateway REST API service
After=network-online.target

[Service]
Environment="API_AUTH=:"  <-- replace
ExecStart=/usr/bin/python3 -m devToolKit -gw  <-- check (depends on deployment) OR /bin/bash
WorkingDirectory=/home/gateway                <-- replace
StandardOutput=inherit
StandardError=inherit
Restart=always
User=                                   <-- replace

[Install]
WantedBy=multi-user.target

• [2] copy service to sudo cp micros-gw.service /lib/systemd/system/

• [3] start service: sudo systemctl start micros-gw.service

• [4] enable service at bootup: sudo systemctl enable micros-gw.service

• [5] show service state: sudo systemctl status micros-gw.service

GIT

• Add git tag: git tag -a vX.Y.Z-K -m "tag message"

• Publish tags: git push origin --tags

• Pretty git view: git log --pretty=oneline

• File change list: git diff --name-only fbb4875609a3c0ee088b6a118ebf9f8a500be0fd HEAD | grep 'mpy-MicrOS'

• GitHub embed youtube link: https://github.com/itskeshav/Add-youtube-link-in-Readme.md

• Git history visualization with Gource

gource \
    --highlight-users \
    --hide filenames \
    --file-idle-time 0 \
    --max-files 0 \
    --seconds-per-day 0.01 \
    --auto-skip-seconds 1 \
    --title "micrOS Evolution" \
    --output-ppm-stream - \
    | ffmpeg -y -r 30 -f image2pipe -vcodec ppm -i - -vcodec libx264 -preset ultrafast -pix_fmt yuv420p -crf 1 -threads 0 -bf 0 output.mp4

git push -u origin master