1. Advisor
  2. esphome
  3. functions
  4. esphome.components.sensor.sensor_schema
View all esphome analysis

How to use the esphome.components.sensor.sensor_schema function in esphome

To help you get started, we’ve selected a few esphome examples, based on popular ways it is used in public projects.

Secure your code as it's written. Use Snyk Code to scan source code in minutes - no build needed - and fix issues immediately.

github esphome / esphome / esphome / components / ina226 / sensor.py View on Github external
import esphome.codegen as cg
import esphome.config_validation as cv
from esphome.components import i2c, sensor
from esphome.const import CONF_BUS_VOLTAGE, CONF_CURRENT, CONF_ID, \
    CONF_MAX_CURRENT, CONF_POWER, CONF_SHUNT_RESISTANCE, \
    CONF_SHUNT_VOLTAGE, ICON_FLASH, UNIT_VOLT, UNIT_AMPERE, UNIT_WATT

DEPENDENCIES = ['i2c']

ina226_ns = cg.esphome_ns.namespace('ina226')
INA226Component = ina226_ns.class_('INA226Component', cg.PollingComponent, i2c.I2CDevice)

CONFIG_SCHEMA = cv.Schema({
    cv.GenerateID(): cv.declare_id(INA226Component),
    cv.Optional(CONF_BUS_VOLTAGE): sensor.sensor_schema(UNIT_VOLT, ICON_FLASH, 2),
    cv.Optional(CONF_SHUNT_VOLTAGE): sensor.sensor_schema(UNIT_VOLT, ICON_FLASH, 2),
    cv.Optional(CONF_CURRENT): sensor.sensor_schema(UNIT_AMPERE, ICON_FLASH, 3),
    cv.Optional(CONF_POWER): sensor.sensor_schema(UNIT_WATT, ICON_FLASH, 2),
    cv.Optional(CONF_SHUNT_RESISTANCE, default=0.1): cv.All(cv.resistance, cv.Range(min=0.0)),
    cv.Optional(CONF_MAX_CURRENT, default=3.2): cv.All(cv.current, cv.Range(min=0.0)),
}).extend(cv.polling_component_schema('60s')).extend(i2c.i2c_device_schema(0x40))


def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    yield cg.register_component(var, config)
    yield i2c.register_i2c_device(var, config)

    cg.add(var.set_shunt_resistance_ohm(config[CONF_SHUNT_RESISTANCE]))

    cg.add(var.set_max_current_a(config[CONF_MAX_CURRENT]))
github esphome / esphome / esphome / components / scd30 / sensor.py View on Github external
from esphome.components import i2c, sensor
from esphome.const import CONF_ID, UNIT_PARTS_PER_MILLION, \
    CONF_HUMIDITY, CONF_TEMPERATURE, ICON_PERIODIC_TABLE_CO2, \
    UNIT_CELSIUS, ICON_THERMOMETER, ICON_WATER_PERCENT, UNIT_PERCENT, CONF_CO2

DEPENDENCIES = ['i2c']

scd30_ns = cg.esphome_ns.namespace('scd30')
SCD30Component = scd30_ns.class_('SCD30Component', cg.PollingComponent, i2c.I2CDevice)

CONFIG_SCHEMA = cv.Schema({
    cv.GenerateID(): cv.declare_id(SCD30Component),
    cv.Required(CONF_CO2): sensor.sensor_schema(UNIT_PARTS_PER_MILLION,
                                                ICON_PERIODIC_TABLE_CO2, 0),
    cv.Required(CONF_TEMPERATURE): sensor.sensor_schema(UNIT_CELSIUS, ICON_THERMOMETER, 1),
    cv.Required(CONF_HUMIDITY): sensor.sensor_schema(UNIT_PERCENT, ICON_WATER_PERCENT, 1),
}).extend(cv.polling_component_schema('60s')).extend(i2c.i2c_device_schema(0x61))


def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    yield cg.register_component(var, config)
    yield i2c.register_i2c_device(var, config)

    if CONF_CO2 in config:
        sens = yield sensor.new_sensor(config[CONF_CO2])
        cg.add(var.set_co2_sensor(sens))

    if CONF_HUMIDITY in config:
        sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
        cg.add(var.set_humidity_sensor(sens))
github esphome / esphome / esphome / components / ina219 / sensor.py View on Github external
import esphome.config_validation as cv
from esphome.components import i2c, sensor
from esphome.const import CONF_BUS_VOLTAGE, CONF_CURRENT, CONF_ID, \
    CONF_MAX_CURRENT, CONF_MAX_VOLTAGE, CONF_POWER, CONF_SHUNT_RESISTANCE, \
    CONF_SHUNT_VOLTAGE, ICON_FLASH, UNIT_VOLT, UNIT_AMPERE, UNIT_WATT

DEPENDENCIES = ['i2c']

ina219_ns = cg.esphome_ns.namespace('ina219')
INA219Component = ina219_ns.class_('INA219Component', cg.PollingComponent, i2c.I2CDevice)

CONFIG_SCHEMA = cv.Schema({
    cv.GenerateID(): cv.declare_id(INA219Component),
    cv.Optional(CONF_BUS_VOLTAGE): sensor.sensor_schema(UNIT_VOLT, ICON_FLASH, 2),
    cv.Optional(CONF_SHUNT_VOLTAGE): sensor.sensor_schema(UNIT_VOLT, ICON_FLASH, 2),
    cv.Optional(CONF_CURRENT): sensor.sensor_schema(UNIT_AMPERE, ICON_FLASH, 3),
    cv.Optional(CONF_POWER): sensor.sensor_schema(UNIT_WATT, ICON_FLASH, 2),
    cv.Optional(CONF_SHUNT_RESISTANCE, default=0.1): cv.All(cv.resistance,
                                                            cv.Range(min=0.0, max=32.0)),
    cv.Optional(CONF_MAX_VOLTAGE, default=32.0): cv.All(cv.voltage, cv.Range(min=0.0, max=32.0)),
    cv.Optional(CONF_MAX_CURRENT, default=3.2): cv.All(cv.current, cv.Range(min=0.0)),
}).extend(cv.polling_component_schema('60s')).extend(i2c.i2c_device_schema(0x40))


def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    yield cg.register_component(var, config)
    yield i2c.register_i2c_device(var, config)

    cg.add(var.set_shunt_resistance_ohm(config[CONF_SHUNT_RESISTANCE]))
    cg.add(var.set_max_current_a(config[CONF_MAX_CURRENT]))
    cg.add(var.set_max_voltage_v(config[CONF_MAX_VOLTAGE]))
github esphome / esphome / esphome / components / sht3xd / sensor.py View on Github external
import esphome.codegen as cg
import esphome.config_validation as cv
from esphome.components import i2c, sensor
from esphome.const import CONF_HUMIDITY, CONF_ID, CONF_TEMPERATURE, ICON_WATER_PERCENT, \
    ICON_THERMOMETER, UNIT_CELSIUS, UNIT_PERCENT

DEPENDENCIES = ['i2c']

sht3xd_ns = cg.esphome_ns.namespace('sht3xd')
SHT3XDComponent = sht3xd_ns.class_('SHT3XDComponent', cg.PollingComponent, i2c.I2CDevice)

CONFIG_SCHEMA = cv.Schema({
    cv.GenerateID(): cv.declare_id(SHT3XDComponent),
    cv.Required(CONF_TEMPERATURE): sensor.sensor_schema(UNIT_CELSIUS, ICON_THERMOMETER, 1),
    cv.Required(CONF_HUMIDITY): sensor.sensor_schema(UNIT_PERCENT, ICON_WATER_PERCENT, 1),
}).extend(cv.polling_component_schema('60s')).extend(i2c.i2c_device_schema(0x44))


def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    yield cg.register_component(var, config)
    yield i2c.register_i2c_device(var, config)

    if CONF_TEMPERATURE in config:
        sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
        cg.add(var.set_temperature_sensor(sens))

    if CONF_HUMIDITY in config:
        sens = yield sensor.new_sensor(config[CONF_HUMIDITY])
        cg.add(var.set_humidity_sensor(sens))
github esphome / esphome / esphome / components / rotary_encoder / sensor.py View on Github external
CONF_PIN_RESET = 'pin_reset'

RotaryEncoderSensor = rotary_encoder_ns.class_('RotaryEncoderSensor', sensor.Sensor, cg.Component)


def validate_min_max_value(config):
    if CONF_MIN_VALUE in config and CONF_MAX_VALUE in config:
        min_val = config[CONF_MIN_VALUE]
        max_val = config[CONF_MAX_VALUE]
        if min_val >= max_val:
            raise cv.Invalid("Max value {} must be smaller than min value {}"
                             "".format(max_val, min_val))
    return config


CONFIG_SCHEMA = cv.All(sensor.sensor_schema(UNIT_STEPS, ICON_ROTATE_RIGHT, 0).extend({
    cv.GenerateID(): cv.declare_id(RotaryEncoderSensor),
    cv.Required(CONF_PIN_A): cv.All(pins.internal_gpio_input_pin_schema,
                                    pins.validate_has_interrupt),
    cv.Required(CONF_PIN_B): cv.All(pins.internal_gpio_input_pin_schema,
                                    pins.validate_has_interrupt),
    cv.Optional(CONF_PIN_RESET): pins.internal_gpio_output_pin_schema,
    cv.Optional(CONF_RESOLUTION, default=1): cv.enum(RESOLUTIONS, int=True),
    cv.Optional(CONF_MIN_VALUE): cv.int_,
    cv.Optional(CONF_MAX_VALUE): cv.int_,
}).extend(cv.COMPONENT_SCHEMA), validate_min_max_value)


def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    yield cg.register_component(var, config)
    yield sensor.register_sensor(var, config)
github esphome / esphome / esphome / components / cse7766 / sensor.py View on Github external
import esphome.codegen as cg
import esphome.config_validation as cv
from esphome.components import sensor, uart
from esphome.const import CONF_CURRENT, CONF_ID, CONF_POWER, CONF_VOLTAGE, \
    UNIT_VOLT, ICON_FLASH, UNIT_AMPERE, UNIT_WATT

DEPENDENCIES = ['uart']

cse7766_ns = cg.esphome_ns.namespace('cse7766')
CSE7766Component = cse7766_ns.class_('CSE7766Component', cg.PollingComponent, uart.UARTDevice)

CONFIG_SCHEMA = cv.Schema({
    cv.GenerateID(): cv.declare_id(CSE7766Component),

    cv.Optional(CONF_VOLTAGE): sensor.sensor_schema(UNIT_VOLT, ICON_FLASH, 1),
    cv.Optional(CONF_CURRENT): sensor.sensor_schema(UNIT_AMPERE, ICON_FLASH, 2),
    cv.Optional(CONF_POWER): sensor.sensor_schema(UNIT_WATT, ICON_FLASH, 1),
}).extend(cv.polling_component_schema('60s')).extend(uart.UART_DEVICE_SCHEMA)


def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    yield cg.register_component(var, config)
    yield uart.register_uart_device(var, config)

    if CONF_VOLTAGE in config:
        conf = config[CONF_VOLTAGE]
        sens = yield sensor.new_sensor(conf)
        cg.add(var.set_voltage_sensor(sens))
    if CONF_CURRENT in config:
        conf = config[CONF_CURRENT]
        sens = yield sensor.new_sensor(conf)
github esphome / esphome / esphome / components / mhz19 / sensor.py View on Github external
UNIT_PARTS_PER_MILLION, UNIT_CELSIUS, ICON_THERMOMETER

DEPENDENCIES = ['uart']

CONF_AUTOMATIC_BASELINE_CALIBRATION = 'automatic_baseline_calibration'

mhz19_ns = cg.esphome_ns.namespace('mhz19')
MHZ19Component = mhz19_ns.class_('MHZ19Component', cg.PollingComponent, uart.UARTDevice)
MHZ19CalibrateZeroAction = mhz19_ns.class_('MHZ19CalibrateZeroAction', automation.Action)
MHZ19ABCEnableAction = mhz19_ns.class_('MHZ19ABCEnableAction', automation.Action)
MHZ19ABCDisableAction = mhz19_ns.class_('MHZ19ABCDisableAction', automation.Action)

CONFIG_SCHEMA = cv.Schema({
    cv.GenerateID(): cv.declare_id(MHZ19Component),
    cv.Required(CONF_CO2): sensor.sensor_schema(UNIT_PARTS_PER_MILLION, ICON_PERIODIC_TABLE_CO2, 0),
    cv.Optional(CONF_TEMPERATURE): sensor.sensor_schema(UNIT_CELSIUS, ICON_THERMOMETER, 0),
    cv.Optional(CONF_AUTOMATIC_BASELINE_CALIBRATION): cv.boolean,
}).extend(cv.polling_component_schema('60s')).extend(uart.UART_DEVICE_SCHEMA)


def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    yield cg.register_component(var, config)
    yield uart.register_uart_device(var, config)

    if CONF_CO2 in config:
        sens = yield sensor.new_sensor(config[CONF_CO2])
        cg.add(var.set_co2_sensor(sens))

    if CONF_TEMPERATURE in config:
        sens = yield sensor.new_sensor(config[CONF_TEMPERATURE])
        cg.add(var.set_temperature_sensor(sens))
github esphome / esphome / esphome / components / hlw8012 / sensor.py View on Github external
CONF_VOLTAGE: HLW8012InitialMode.HLW8012_INITIAL_MODE_VOLTAGE,
}

CONF_CF1_PIN = 'cf1_pin'
CONF_CF_PIN = 'cf_pin'
CONFIG_SCHEMA = cv.Schema({
    cv.GenerateID(): cv.declare_id(HLW8012Component),
    cv.Required(CONF_SEL_PIN): pins.gpio_output_pin_schema,
    cv.Required(CONF_CF_PIN): cv.All(pins.internal_gpio_input_pullup_pin_schema,
                                     pins.validate_has_interrupt),
    cv.Required(CONF_CF1_PIN): cv.All(pins.internal_gpio_input_pullup_pin_schema,
                                      pins.validate_has_interrupt),

    cv.Optional(CONF_VOLTAGE): sensor.sensor_schema(UNIT_VOLT, ICON_FLASH, 1),
    cv.Optional(CONF_CURRENT): sensor.sensor_schema(UNIT_AMPERE, ICON_FLASH, 2),
    cv.Optional(CONF_POWER): sensor.sensor_schema(UNIT_WATT, ICON_FLASH, 1),

    cv.Optional(CONF_CURRENT_RESISTOR, default=0.001): cv.resistance,
    cv.Optional(CONF_VOLTAGE_DIVIDER, default=2351): cv.positive_float,
    cv.Optional(CONF_CHANGE_MODE_EVERY, default=8): cv.All(cv.uint32_t, cv.Range(min=1)),
    cv.Optional(CONF_INITIAL_MODE, default=CONF_VOLTAGE): cv.one_of(*INITIAL_MODES, lower=True),
}).extend(cv.polling_component_schema('60s'))


def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    yield cg.register_component(var, config)

    sel = yield cg.gpio_pin_expression(config[CONF_SEL_PIN])
    cg.add(var.set_sel_pin(sel))
    cf = yield cg.gpio_pin_expression(config[CONF_CF_PIN])
    cg.add(var.set_cf_pin(cf))
github esphome / esphome / esphome / components / ina226 / sensor.py View on Github external
import esphome.config_validation as cv
from esphome.components import i2c, sensor
from esphome.const import CONF_BUS_VOLTAGE, CONF_CURRENT, CONF_ID, \
    CONF_MAX_CURRENT, CONF_POWER, CONF_SHUNT_RESISTANCE, \
    CONF_SHUNT_VOLTAGE, ICON_FLASH, UNIT_VOLT, UNIT_AMPERE, UNIT_WATT

DEPENDENCIES = ['i2c']

ina226_ns = cg.esphome_ns.namespace('ina226')
INA226Component = ina226_ns.class_('INA226Component', cg.PollingComponent, i2c.I2CDevice)

CONFIG_SCHEMA = cv.Schema({
    cv.GenerateID(): cv.declare_id(INA226Component),
    cv.Optional(CONF_BUS_VOLTAGE): sensor.sensor_schema(UNIT_VOLT, ICON_FLASH, 2),
    cv.Optional(CONF_SHUNT_VOLTAGE): sensor.sensor_schema(UNIT_VOLT, ICON_FLASH, 2),
    cv.Optional(CONF_CURRENT): sensor.sensor_schema(UNIT_AMPERE, ICON_FLASH, 3),
    cv.Optional(CONF_POWER): sensor.sensor_schema(UNIT_WATT, ICON_FLASH, 2),
    cv.Optional(CONF_SHUNT_RESISTANCE, default=0.1): cv.All(cv.resistance, cv.Range(min=0.0)),
    cv.Optional(CONF_MAX_CURRENT, default=3.2): cv.All(cv.current, cv.Range(min=0.0)),
}).extend(cv.polling_component_schema('60s')).extend(i2c.i2c_device_schema(0x40))


def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    yield cg.register_component(var, config)
    yield i2c.register_i2c_device(var, config)

    cg.add(var.set_shunt_resistance_ohm(config[CONF_SHUNT_RESISTANCE]))

    cg.add(var.set_max_current_a(config[CONF_MAX_CURRENT]))

    if CONF_BUS_VOLTAGE in config:
github esphome / esphome / esphome / components / adc / sensor.py View on Github external
'11db': cg.global_ns.ADC_11db,
}


def validate_adc_pin(value):
    vcc = str(value).upper()
    if vcc == 'VCC':
        return cv.only_on_esp8266(vcc)
    return pins.analog_pin(value)


adc_ns = cg.esphome_ns.namespace('adc')
ADCSensor = adc_ns.class_('ADCSensor', sensor.Sensor, cg.PollingComponent,
                          voltage_sampler.VoltageSampler)

CONFIG_SCHEMA = sensor.sensor_schema(UNIT_VOLT, ICON_FLASH, 2).extend({
    cv.GenerateID(): cv.declare_id(ADCSensor),
    cv.Required(CONF_PIN): validate_adc_pin,
    cv.SplitDefault(CONF_ATTENUATION, esp32='0db'):
        cv.All(cv.only_on_esp32, cv.enum(ATTENUATION_MODES, lower=True)),
}).extend(cv.polling_component_schema('60s'))


def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    yield cg.register_component(var, config)
    yield sensor.register_sensor(var, config)

    if config[CONF_PIN] == 'VCC':
        cg.add_define('USE_ADC_SENSOR_VCC')
    else:
        cg.add(var.set_pin(config[CONF_PIN]))

esphome

Make creating custom firmwares for ESP32/ESP8266 super easy.

GitHub
MIT
Latest version published 21 hours ago

Package Health Score

93 / 100
Full package analysis

Popular esphome functions

Similar packages